Heavy Maggam Work Blouse Designs Using Beads and Threads | Maggam Work Blouse Designs

Heavy Maggam Work Blouse Designs Using Beads and Threads | Maggam Work Blouse Designs

heavy maggam work designs
Image Source by elaine8547 – heavy maggam work designs
  • How to Make Heavy Maggam work Designs and Ideas
  • Using Materials for Heavy Maggam work Designs
  • Blouse Front And Back Neck Shape
  • Heavy Maggam work Designs Sleeve Designs
  • Heavy Maggam work Designs protection method
  • Heavy Maggam work Designs Secret of Beauty
  • Heavy Maggam work Designs 

    Heavy Maggam Work Designs can only be beautifully designed by experienced people. Heavy Maggam Work Designs definitely requires a lot of practice and effort. If the beginners have a lot of training and effort, This type of design can be created very easily and beautifully.
    If you are going to put a design on a blouse, Take a close look at the sample design and see what kind of materials are used.
    Now i am going to explain the Heavy Maggam Work Designs, Please see the image Above
    First you should select the designs, Then prepare and keep the necessary items. I am going to explain step by step how to design Heavy Maggam Work Designs with aari work.

    Materials needed for Heavy Maggam Work Designs
    Look clearly at the blouse design given above and find out what kind of materials are used on the arm area, back neck and front neck areas. All of the materials used are given below.
    Aari Stand
    Aari Frame ( adjustable screw type )
    Aari Needle ( Hand Needles )
    Sugar Beads
    Karthana (Half Bead)
    Zardosi (Golden Zardosi )
    Zari Thread (Golden jari thread )
    Running Stone Chains
    Antique and Gold Beads
    Kundans Stones
    Tracing Pencil or Glass Marking Pencil
    Zarthosi Needle
    Carbon Paper
    Mirror/ Blouse Glass Work
    Lakshmi Coin for Aari Work
    Thread Cutter/Thread Clipper
    Measuring Tape
    Fabric Glue, Embroidery Glue
    Butter paper

    Find the right items to design a blouse and take note of them, check and buy the items needed to design a blouse at the right store.

    You can easily design Heavy Maggam Work Designs by following the steps below
    Step 1 :
    Choose the right fabric for the Heavy Maggam Work Designs
    Step 2 :
    how to use aari frame and how to fit the clothes properly
    It consists of two round wooden frames, one of which is a small round wooden frame and the other a very large adjustable frame. Place the fabric to be embroidered exactly on top of the small round wooden frame, then attach the large round frame to that fabric on top of the small fabric. The adjustment of that large frame should be locked in place with the correct tightness, then slightly pull the fabric on the outside of the frame to make sure the fabric on the inside of the frame is tight. Now the general we sew by hand will be correct and our vision will be correct.
    Step 3 : “Heavy Maggam Work Designs “
    Use the old blouse with the right body size and check the sizes of the blouse that will be made into the new design.
    Note: If the body size of the old blouse is incorrect, the newly designed blouse will be incorrect, so attention is required.

    Step 4 :
    The back neck of the Heavy Maggam Work Designs that are being designed are “pot – shape”, which can accurately measure old blouse sizes. If the blouse does not fit the body size, measure the new one. Maybe customers want a different shape of the back neck.


    Heavy Maggam Work Blouse Designs
    Heavy Maggam Work Blouse Designs

    for example
    U – shape
    ப – shape
    v – shape
    Butterfly shape
    Full closed back neck
    Half Pot shape
    Pot shape and more

    Back neck pot shape model Heavy Maggam Work Designs

    Step 5 :
    Drawing the design on the blouse
    How to draw a design, look at the picture above and draw the design neatly and clearly, use the Marking Pencil to draw the picture. If there is any mistake in the drawing while drawing the design, erase it using an eraser.
    Drawing method with carbon paper
    Take the required design paper and carbon paper. First place the carbon paper on the blouse in the right place, then place the drawing on the carbon paper so that it does not move, and then draw with a pencil or pen on the drawing.

    Step 6 :
    The back neck should be sewn with Zari twice around the initial border area, Thus when sewn twice the border area is strengthened to prevent tearing, when the fabric is cut and sewn.

    Note : Look clearly at the picture above Heavy Maggam Work Designs, whether the blouse design is sewn with a zari on the border at the back neck area or not, incase not sewn the zari please avoid stitching with zari on the blouse design.

    Step 7 :
    Sew with sugar beads, near the zari already sewn twice
    How to sew sugar beads: Take the golden tailoring thread and tie the knot at the starting point where you want to sew, Then attach the sugar beads to the beads needle, Sew the sugar beads with the knotted thread, Thus sew the beads back together with the needle

    Note : Look clearly at the picture above, whether the blouse design is sewn with sugar beads on the border at the back neck area or not, incase not sewn the sugar beads please avoid stitching with sugar beads on the blouse design.

    Step 8 :
    Clearly design the back neck border on the given blouse, and when the border section is finished, look at the other blank area on the blouse and see what kind of designs are on that empty area.

    Look at the design in the area other than the back neck border of the model blouse given above, similarly, draw the design on your new blouse and use the same materials in the design

    Step 9 :

    Hand area (Sleeve Part)

    This is the heart of the design, The hand part is the main part of the design, The area that gives the most beauty, More attention is needed in designing the hand area,
    There are two types of hand area
    1. Small hand
    2. Long hand (elbow)
    Note: More attention is required when marking the size of the hands
    Although the right hand and left hand are the same size, the design is a little different
    Although small hand and large hand (elbove), the design is a little different, Blouse users may have more or less arm circumference, Small changes in design are likely to occur during that time.

    Step 10 :
    More attention needs to be paid to the design of the hand part in the blouse, take a look at the hand design in the picture above and find out what kind of design is in the initial border area of ​​the hand, using what materials. Also design the Heavy Maggam Work Designs arm area border with the right materials,
    After designing the sleeve border, look at the rest of the section and design your blouse by looking at what kind of designs are available, the materials used to design the sleeve area of ​​the blouse, etc.

    Step 11 :
    Design and create the left hand in the same way as the right hand,

    Draw The Designs on Tracing method
    If you have an already drawn picture or a copied picture, you can use it to draw designs on the blouse in a traceable manner, which requires carbon paper.

    Heavy Maggam Work Blouse Designs
    Sleeve Maggam Work Blouse Designs

    Hand Part ( sleeve)
    The left-hand design should be the same as the right-hand design. It uses paper twisting on the design,
    Place the white paper on the right hand design and place it on the blouse design so that the white paper does not move.
    Now gently tweak the top of the white paper with a pencil so that the pattern on the blouse is on the twisted paper and twist until the desired size is desired.
    Draw the copy on the left hand with carbon paper and make sure the design is correct after drawing.
    Now The Heavy Maggam Work Designs is ready.
    Heavy Maggam Work Designs can be designed beautifully and without error only if you follow the above steps correctly.

    Heavy Maggam Work Designs protection method

    It is very important to protect the hard-designed blouse
    The dirt on the blouse is easily discolored
    Wearing a discolored blouse does not give beauty
    Objects that change color easily
    Sugar beads (golden color)
    Large beads (gold color)
    Running Stone
    Dirty objects with golden color
    The main reason for the change in color is the perspiration and temperature in our body in general
    Gold-colored cosmetics, at a temperature of 30 degrees, undergo a chemical transformation along with a mixture with air, so the color changes easily.

    Things to do to keep the color unchanged
    Cover the designed blouse well with an airtight polythene cover and then place on a shelf
    Hip size For Heavy Maggam Work Designs
    The Heavy Maggam Work Designs can be divided into two sections
    Aari work design
    Stitching properly
    Aari Work design depends on the designer
    Stitching depends on the tailor
    If the design is incorrect it is the designer’s fault,
    It is the tailor’s fault if the body sizes and fit are not correct,
    Only if these two are right, the wedding blouse will be perfect and the beauty will be great,
    Waist size is very important, you can not wear a blouse if the size increases or decreases,
    The waist size of the blouse is high and will be uncomfortable after wearing,
    Blouse waist size is low, can not be worn to be tight,

    Conclusion: Heavy Maggam Work Designs

    Heavy Maggam Work Designs is clearly explained by this article,
    Then the materials needed for this design and how to handle them,
    How to start designing,
    Steps in the design of ongoing work,
    How to finish the design,
    Tips to look out for in this design
    Colors that match the design exactly
    How to take the required size from the old blouse,
    How to fix a design error
    We have also told you how to protect Heavy Maggam Work Designs
    The above has been clearly explained by me as the author through this article

    Heavy Maggam Work Designs The Secret of Beauty
    The back neck and sleeve location of this blouse is amazing,
    beads and stone work put on elbow,
    Sugar beads placed on the border around the back neck,
    These are the beauty of Heavy Maggam Work Designs,

    Conduct us
    Social media :
    Instagram :
    Facebook Page : Bridal Blouse Designs
    Facebook Group : Bridal Blouse Designs
    Pinterest : Bridal Blouse Designs (Aari Work)
    Heavy Maggam Work Designs
    Youtube : Aari Work
    twitter : Bridal Blouse Design (Aari Work)
    linkedin : Aari Work Blouse Designer
    Tumblr : Bridal Blouse Designs (Aari Work)
    If you have any doubts about the Heavy Maggam Work Designs, or have any questions about on aari embroidery, please contact me through E-mail id or comment me Thank You

    filling stitch method
    Inspect the area where you decided to sew the filler stitch
    The filler will be so beautiful only if sewn in the right place
    Complementary stitches can be classified into two
    Stretch and sew the thread
    Chain series stitching pattern
    The chain series stitching in the empty space is so beautiful
    Stretching and sewing of thread is best for pipe thick thread and leaf shaped shapes

    Pipe thick thread sewing method:
    Sew the thread at the bottom of the pipe thick thread and then pull the thread and sew at the top, Sew on the top and then pull the thread and sew on the bottom, thus sewing with the filler seam until the pipe thick thread is completely finished.
    How to paste and sew a Running Stone:
    Choose where to place the Running Stone,
    Measure the right size length and cut the stones
    Put the glue where the stones should be placed
    Place the Running stones correctly on the glue
    Wait until the glue dries
    Sew with thread continuously as a place for ten stones

    Leave a Comment